Insert And Charge Battery; Switch Telephone On; Emergency Call - Siemens A40 User Manual

Siemens cell phone user guide
Hide thumbs Also See for A40:
Table of Contents

Advertisement

3. Insert and Charge
Battery
To Insert the Battery
• Insert the battery as indicated below
(contacts on top end).
• Refit the cover, ensure the top end
is flush before pressing it closed
(until it clicks).
To Charge the Battery:
Your new battery will not be fully
charged:
• Insert the plug into the charger into
the socket in the phone
(see illustration below).
• Plug the charging unit into the mains
power socket (first checking the rat-
ed voltage of the charging unit).
K
The charging progress is shown
on your display. You may use
your phone whilst charging.
J
Charging complete.
Battery is fully charged.
Getting Started
• To release, squeeze the arrows on
.

4. Switch Telephone On

8
If Insert SIM Card is displayed, check
that the SIM card is correctly inserted
(

5. Emergency Call

You can contact the emergency servic-
es at any time even without a SIM
card. Simply dial 112 (999 in the UK).
the plug together and remove.
Charging Time
Allow at least 3 hours for your first
few charges. 1.5 - 2 hours are enough
after this.
Usage Time
A full charge can provide from 60 to
150 hours standby, or from 90 to 240
minutes talk time (depending on use
and network conditions).
A beep sounds when the battery
needs charging.
Hold down to switch on.
¼
p. 32).
7

Advertisement

Table of Contents
loading

Table of Contents