2. Remove the T10 screws [2] on top of the inner rim,
including the one which secures the grounding clamp (3,
see Figure "Grounding clamp").
3. Now, remove the plastic cable fixation noose (4, see Figure
"Cable fixation noose").
4. After removal of all the screws, slightly push the top of the
cover inwards. This will lift the outer rim slightly up so you
can take the cover out.
1
Figure 4-3 Speaker compartment cover removal
Figure 4-4 Grounding clamp
Mechanical Instructions
2
F_15430_045.eps
100605
3
F_15430_046.eps
100605
LC4.9E AA
4
Figure 4-5 Cable fixation noose
4.
EN 9
F_15430_047.eps
100605