Computer Image Adjustments (Input 2 (Rgb) Mode Only); Auto Sync Adjustment - Sharp XV-Z7000E Operation Manual

Computer Image Adjustments (INPUT 2 (RGB) mode only)

Remote control
RGB/
INPUT 1 COMPONENT PICT MODE
INPUT 2 AUTO SYNC GAMMA
S-VIDEO CLR TEMP
VIDEO KEYSTONE FREEZE
On-screen Display

Auto Sync Adjustment

• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
1
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
1 Press AUTO SYNC on the remote control.
During Auto Sync adjustment, "Adjusting The Image"
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See page 27.)
26