Trouble Shooting - Shark SC630WC Owner's Manual

Trouble Shooting

POSSIBLE
PROBLEM
REASONS
The Steam Bottle is not
plugged in.
There is no
steam
There is not enough
water in the unit.
Mineral build-up may be
clogging the nozzle.
There is not
enough steam
Water level may be low.
The microfiber fabrics
may be dirty and need
The cleaning
to be replaced or
pockets are
washed.
streaking or
leaving dirt
behind
The microfiber fabric
may be worn.
The cleaning
tool handles
The connection may not
keep falling
be secure.
off the hose
12 TOLL FREE: 1-877-304-7670
SC630WC_IB_En_100119.indd 12-13
SOLUTIONS
Verify that the Blue light is on and
the product is plugged in correctly
into a working outlet.
Fill the steam bottle tank.
Using the nozzle cleaner, carefully
clean the nozzle to remove debris.
Fill the steam bottle tank.
Use the other sides, if clean.
Replace with a clean cleaning
pocket.
Replace as needed.
Check the connection, making sure
you are pressing in and turning at
the same time.
Notes English
www.sharkclean.com 13
1/26/10 12:13 PM