Advertisement
8
Installing Printer LAN Setting Tool
1. The Printer LAN Settings Tool window is
displayed. Click [Next].
9
PR-LN4 Settings
*If the [User Account Control] dialog box is displayed, click [Allow] or [Yes].
(*1)
1. Click the PR-LN4 setting tool.
1. The main screen of the tool
For Windows 10
is displayed. Click [Next].
and Windows Server 2016:
Click [Fujitsu Dot Matrix Printer Utility]
-> [Settings Tool] from All apps in the
Windows Start menu.
For Windows 8 and later :
Click the [Settings Tool] tile in the Apps
view.
For Windows 7 and earlier:
Click [Fujitsu Dot Matrix Printer Utility]
-> [Printer LAN Tool] -> [Settings Tool]
from All Programs in the Windows
Start menu.
*1) Refer to PR-LN4 Software Guide.
10
Adding an original TCP/IP port
2. Set the IP address, port name, and protocol.
1. When this screen is displayed, click [Yes].
Click [Next].
*1) You can also specify the IP address by searching
© 2016 FUJITSU ISOTEC LIMITED This manual was made with recycled paper.
*If the [User Account Control] dialog box is displayed, click [Allow] or [Yes].
2. Specify the installation folder. Click [Next].
*
Click Change to select the installation folder.
2. When this screen is
3. Select the printer to configure
displayed, click [Yes].
*1) If a list of search results is not
*2) Check the labels displayed on
*3) If you search printer set as
*If the [User Account Control] dialog box is displayed, click [Allow] or [Yes].
3. Confirm the settings and
click [Apply].
for the printer using [Search printers].
3. Start installation. Click [Install].
4. A screen appears indicating that the
installation is in progress.
Please wait for the installation to complete.
4. Configure the IP address.
from among the search result
After configuring the settings,
and click [Next].
click [Next].
DHCP Enable: To acquire the IP address automatically from a DHCP server
DHCP Disable: To set the IP address manually
displayed, click [Search].
the printer for the MAC address.
"Enable" of DHCP under network
environments which do not have
DHCP server, the printer's IP
address displays "0.0.0.0".
4. This completes adding the port,
click [Finish].
5. This window is displayed after the "LAN Settings
Tool" installation completes.
Follow the on-screen instructions and click [Finish].
5. Confirm the settings and
6. Enter the "root
click [Apply].
password" set in
the printer server
and click [OK].
*1) Under the factory
default settings, the
password is not set
and you should leave
it blank.
- This document describes the installation and usage of the PR-LN4
when it is used on FUJITSU DL7600Pro/DL7400Pro printer.
PR-LN4 is Windows-specific software to display the status of the printer.
- The location and name of the documents in the CD-ROM are as follows.
- PR-LN4 Software Guide
\\Documents\PR-LN4 Software Guide\PR-LN4_SoftwareGuide.pdf
- The ".NET Framework 3.5 SP1" or higher is required in order to use this tool.
If it is not installed, obtain and install the ".NET Framework 3.5 SP1" from
the Microsoft website.
- Administrator privileges are required in order to run this tool.
Log into the Administrators account to run.
KA02086-Y625-02EN
7. This completes the settings.
To also create a "Original
TCP/IP Port", click [Next].
Advertisement
