Preparing For Configuration; Preparing The Power Adapter; Charging The Control Panel; Installing Prontoedit Professional - Philips TSU9300 Starter Manual

Hide thumbs Also See for TSU9300:

Table of Contents

TSU9300 Starter's Guide

Preparing for Configuration

• Pull out the contacts and use the adapter with the standard power plug.

-or-

• Place one of the add-ons over the standard power plug and use the adapter with the add-on.

It is advised to charge the Control Panel to its maximum before you start configuring it.

This can take up to 3 hours.

Activate the Control Panel by switching the Power switch

on the left side of the Control Panel to '1'.

Place the Control Panel in the docking station.

The docking station glows when it is powered.

A red LED on the docking station will light up while the

Control Panel is charging.

In the box you find a CD with which you install ProntoEdit Professional. You can also check for

updates on http://www.pronto.philips.com in the Downloads section (PC Software).

Insert the CD in the PC and follow the on screen instructions to install the editor.

Notes

Although ProntoEdit Professional can be installed together with older Philips Pronto editors,

we strongly recommend using this integrated editor for all your configuring.

If you want to update ProntoEdit Professional and you have inserted personal images in the

Gallery, you can make a back up of the gallery. You will be noted to do so in the installation

wizard.

Table of Contents