Figure 3-9 Panel Of The Ac Power Supply; Table 3-4 Description Of The Indicators Of The Ac Power Supply - Huawei Quidway S9300 Hardware Description

3 Power Supply

Figure 3-9 Panel of the AC power supply

1
3
1. Power input
Table 3-4

Table 3-4 Description of the indicators of the AC power supply

Indicator
RUN
ALM
FAULT
3-12
2
ON
4
OFF
RUN
ALM
FAULT
2. Handle
describes the indicators of the AC power supply.
Color
Green
Yellow
Red
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
3. Switch
Description
If the indicator is on, it indicates that the AC
power input is normal.
If the indicator is off and the FAULT indicator
or ALM indicator is on, it indicates that a fault
occurs or an alarm other than the over-current
alarm is generated.
If the indicator is on, it indicates a PS-off alarm,
over-temperature alarm, over-voltage alarm,
under-voltage alarm, or over-current alarm.
If the indicator blinks, it indicates that the
communication is fault.
If the indicator is off, it indicates that the power
supply is normal.
If the indicator is on, the power supply is faulty
and the fault cannot be rectified.
If the indicator is off, it indicates that the power
supply does not have any fault that cannot be
rectified.
Hardware Description
4. Indicator
Issue 01 (2010-12-15)