Inserting An Sd/Sdhc Memory Card; Turning On - Sanyo VPC-S1275 Instruction Manual

16 Camera Setup

Inserting an SD/SDHC Memory Card

The camera features 16 MB internal flash memory but you may also use an optional SD/
SDHC memory card for additional storage.
Follow these instructions to insert the SD/SDHC card.
1. Open the battery compartment
on the botton of the camera.
2. Insert the SD/SDHC card into the
memory card slot as shown.
(Label side up)
3. Close the battery
compartment.
4. To remove the SD/SDHC card, gently push the card until it
pops out. Pull out the card carefully.
Note:
Please do not take in and out the SD/SDHC card while camera is processing.
It will make unexpected error or image damaged.

Turning On

Press and hold the POWER button to turn on the camera. To turn off the camera, press
the POWER button again.
Inserting an SD/SDHC Memory Card