Casio LK-220 User Manual page 15

5.
Output the sound from the microphone.
The Digital Keyboard will start sampling automatically,
and stop after one second.
What you sample is stored as tone number 401.
S a m
p
O r i
g
6.
Try playing something on the keyboard.
• Sampling will not start if the volume of the sound picked up
by the microphone is too low.
• A new sample replaces sample data currently stored as
tone number 401. The old data is deleted.
Turning off power clears sampled data!
Turning off power will cause any sampled sound data on the
keyboard to be deleted.
■ How sampled sounds are played
Pressing Middle C (C4) will play back the original sound. The
keys to the left and right of C4 play the sound at different
pitches.
C4
Flashes
l i n
g
Lights
i n a l
Controlling the Keyboard Sounds
Starting a Sampling Operation Manually
1.
4
Press a number of times until "SmplAuto"
appears on the display (page E-4).
S m l A u t o
p
2.
bo
Press the (10-key) [–] key to select the OFF
setting.
This enables manual sampling. When this setting is
selected, sampling will not start until you press
• When the above setting is "oFF", sampling starts when
5
you release , not when you press it. Sampling will not
5
start if you keep depressed.
5
.
E-13