Setting Up Your Side-By-Side; Getting Ready To Install The Refrigerator - Samsung RS263TD series User Manual

setting up your side-by-side refrigerator

getting reaDy to instaLL the refrigerator

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many
state-of-the-art features and efficiencies that this new appliance has to offer.
selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Refer to drawing and dimensions below for overall space required for use.
Do not install the refrigerator where the temperature can drop below 50°F (10°C).
When moving your refrigerator
To prevent floor damage, be sure the front leveling legs are in the up
position (above the floor). Refer to 'Leveling the refrigerator' in the
manual (page 17).
To protect the finish of the flooring, place a protection sheet, such as
packing carton under the refrigerator.
When installing, servicing or cleaning behind the
refrigerator, be sure to pull the unit straight out and push
CAUTION
back in straight after finishing.
10_ setting up
2
at least " (50.8mm)
135 135
3
62 (1,577mm)
20
2
at least " (50.8mm)