Removing The Freezer Drawer Accessories - Samsung DA68-01812H User Manual

REMOvING THE FREEzER ACCESSORIES
1. Tilting Pocket
To remove - Pull the brackets(
To replace - Hook the ends of the pocket into both brackets
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension.
To relocate - Place the drawer onto the rails by tilting it up.
3. Freezer Drawer bin
To remove the drawer - Pull the drawer out fully.
To replace the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
To replace the divider - Hook the top corners of divider over
DA68-01812H.indb 27
) upward until you hear a
1
clicking sound and remove the pocket
( ) and push down until it locks into place.
1
Tilt up rear of drawer and lift straight out.
Lower the drawer into place until it is horizontal
and slide the drawer in.
Tilt up the rear of the bin and lift it
out to remove.
the hole of the bin.
1
1
2
Operating _27
2009.8.10 9:5:4 AM