Advertisement
Step 6
: Remote Control
Remote Control Buttons and Functions
Turns the TV on and off.
Displays and selects the available video sources.
Press to directly access channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example, to select
channel "54-3", press "54", then press "–" and "3".
Adjusts the volume.
Brings up the OSD.
Displays the Content View, which includes Channel
List, Internet@TV, Media Play, AllShare and 3D.
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel List, Internet@TV,
Media Play menu, etc.
Use these buttons in Media Play and
Anynet+ (HDMI-CEC) modes. (�: Controls recording
for Samsung recorders that have the Anynet+ feature)
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button
on the remote.
✎
You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the y button.
CONTENT
TOOLS
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps:
RETURN
CONTENT
1. Turn on your TV, press the
MENU
button on your
remote. The main menu appears.
A
TOOLS
The menu's left side has the following menu
options: Picture, Sound, Channel, Setup, Input, Application, and Support.
MEDIA.P
2. Press the ▲ or ▼ button on your remote to select a menu option, and then
RETURN
FAV.CH
press the ENTERE button.
3. When done using the menu, press the
EXIT
button on your remote to exit.
A
MEDIA.P
Selecting a Source
FAV.CH
To watch a movie on your Blu-ray player or watch
your favorite TV show, you must select the correct
source. A source is a device, such as a Blu-ray/DVD
player, a cable/satellite box, antenna or a cable TV
input. Sources can be connected to your TV through
the HDMI, DVI, Component, Composite, or D-sub
connections, or through the Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the
SOURCE
button on your remote. Each time
you press the
button, you change to a different source.
SOURCE
CONTENT
POWER
ON/OFF
SOURCE
Turns the remote control light on or off. When on, the
buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to off will
reduce the battery usage time.)
Returns to the previous channel.
PRE-CH
Cuts off the sound temporarily.
MUTE
Changes channels.
CH LIST
Displays the channel list on the screen.
INTERNET
MENU
Link to various internet services.
CONTENT
@ TV
TOOLS
INFO
Displays information on the TV screen.
Selects the on-screen menu items and changes the values
seen on the menu.
RETURN
EXIT
Exits the menu.
A
B
C
D
MEDIA.P: Displays Media Play.
MEDIA.P
YAHOO!
YAHOO!: Runs the Yahoo widget.
3D: Sets the 3D mode.
FAV.CH
P.SIZE
CC
FAV.CH: Displays Favorite Channel Lists on the screen.
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
SOURCE
SOURCE
PRE-CH
Change the channels by pressing the Channel button on the remote.
MUTE
✎
If your TV is attached to a cable or satellite box, change the channel using
CH LIST
the box's remote.
PRE-CH
MENU
INTERNET
@
MUTE
INFO
Using Motion Judder Canceller
CH LIST
Motion Judder Canceller technology virtually eliminates any blur in video that
EXIT
MENU
INTERNET
contains fast motion, such as sports and action movies. To activate Motion Judder
@
Canceller, follow these steps:
B
C
D
INFO
1. Turn on your TV, press the
MENU
button on your remote, then select Picture
Options → Motion Judder Canceller.
YAHOO
3D
EXIT
2. Select the Motion Judder Canceller setting you want.
P.SIZE
CC
✎
If Motion Judder Canceller is Demo, you can compare the difference
B
C
D
of on and off modes.
3. Press the
RETURN
button on your remote when done.
YAHOO
3D
P.SIZE
CC
SOURCE
PRE-CH
MUTE
CH LIST
MENU
INTERNET
@
Step 7
: The Internet@TV and Media Play Features
Your TV's Internet@TV feature (IPTV) lets you connect to an ever-expanding portal
of your favorite on-line digital content. Customizable widgets give you access to
Blockbuster, Facebook, YouTube, Flickr, Netflix* and more - all on your HDTV. The Media
Play feature lets you connect to your PC through your home network and stream PC
audio and video files to your HDTV using your remote. To use IPTV or Samsung PC
Share Manager, you must connect your TV to your network. You can attach the TV to
your network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung
Wireless LAN Adapter. Instructions for both connection methods are below.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable,
depending on your network setup. They are illustrated below:
TV Rear Panel
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)
LAN Cable (Not Supplied)
TV Rear Panel
The LAN Port on the Wall
LAN Cable (Not Supplied)
Configuring the Network Connection - Wired
Most home networks use the
Network Setup
Dynamic Host Configuration Protocol
Internet Protocol Setup : Auto
(DHCP) to configure network
IP Address
:
connections. Home networks that
Subnet Mask
:
support DHCP automatically provide
Gateway
:
the IP address, subnet mask,
gateway, and DNS values your TV
DNS
: Auto
needs to access the Internet so you
DNS Server
:
don't have to enter them manually.
To configure your network connection
U Move E Enter R Return
for a network that uses DHCP, follow
these steps:
1. Connect your TV to your network as shown in one of the illustrations above.
2. Turn on your TV, press the
MENU
button on your remote, and then select
Setup → Network.
3. Set the Network Type to Wired if it is not already set to Wired.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
Auto acquires and enters the necessary internet values automatically.
6. Select Network Test to check Internet connectivity.
✎
Some networks are Static IP networks. If your network is a Static IP network,
you can not use DHCP to configure the network connection. Instead, you
must enter the IP Address, Subnet Mask, Gateway, and DNS Server
manually. For instructions explaining how to configure a Static IP network,
see your user's manual.
Starting Internet@TV
To view the On Screen
Recommended
Menus, follow these steps:
1. Turn on your TV, press
the
MENU
button
My Applications
on your remote, then
select Application →
Content View.
2. Press the ◄ or ►
button to select
Samsung Apps
Settings
Internet@TV, then
Login
Mark as Favorite
press the ENTERE
button. The USER TERMS and PRIVACY POLICY windows appears, then
select Yes.
3. Follow the directions on your screen to set up Internet@TV. For detailed
instructions, see your Owner's Manual.
✎
For best Internet@TV results, your broadband company should provide
sustained download speeds of 3.5 mb/sec or more.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or
modem. To connect wirelessly, you must first attach a "Samsung Wireless LAN
Adapter" (WIS09ABGN, WIS09ABGN2,WIS10ABGN - sold separately) to either the
USB 1 (HDD)
or
USB 2
port on the back of your TV. See the illustration below.
Wireless IP sharer
(AP having DHCP server)
The LAN Port on the Wall
LAN Cable (Not Supplied)
Samsung's Wireless LAN adapter is sold separately and is offered by select
retailers, Ecommerce sites and Samsungparts.com. Samsung's Wireless LAN
adapter supports the IEEE 802.11A/B/G and N communication protocols.
Samsung recommends using IEEE 802.11N. When you play the video over a IEEE
802.11B/G connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices
that access the network through an access point or AP (typically a wireless IP
Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption
type is set to WEP, TKIP or TKIPAES (WPS2Mixed) for your AP, Samsung TVs will
not support a connection in compliance with new Wi-Fi certification specifications.
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user's manual for configuration instructions. To configure
r
your network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustrations above.
2. Turn on your TV, press the
MENU
button on your remote, and the select Setup
→ Network.
3. Set the Network Type to Wireless if it is not already set to Wireless.
4. Select Network Setup. The Network Setup screen appears.
5. On the Network Setup menu,
select an AP (Access Point) or ad
Select a network
hoc network. If you have selected
Internet Protocol Setup : Auto
a network with a security key, the
IP Address
Security Key screen appears.
Subnet Mask
6. Enter the security key using the
Gateway
numbers on the remote, and then
DNS
press the Blue button on your
DNS Server
remote.
✎
If your network uses WEP
security encryption, 0~9 and
A~F will be available on the Security Key screen. Use the Direction
button on your remote to move to the characters and the enter key to
select them.
7. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto.
The Auto acquires and enters the necessary internet values automatically.
8. Select Network Test to check internet connectivity.
✎
For more information, see your user's manual.
Connecting a USB Device for Media Play
You can enjoy photo, music,
MediaPlay
and movie files stored on a
by Date 1/1
USB device by connecting
Videos
it to the TV and using
the Media Play feature.
For Media Play operating
instructions, please see your
Owner's Manual.
Sort by
R Return
SUM
Change Device
Samsung Wireless
TV Rear Panel
LAN Adapter
or
Network Setup
: Not Selected
r
:
:
:
: Auto
:
PBC(WPS) U Move E Enter R Return
View Devices E Enter R Return
BN68-02619A-03
Advertisement
