Viewing The Control Panel - Samsung 6000 Installation Manual

COMPONENT IN
$
– Connects Component video / audio.
– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect
the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of the TV set and the other ends to corresponding
audio out jacks on the DVD.
EXT(RGB)
%
Connector
EXT
✎
Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
ANT IN
^
– To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
antenna / A cable television network / A satellite network
& LAN: Connect a LAN cable to this port to connect to the Network.
* Power Input
✎
The product colour and shape may vary depending on the model.
Speakers
SOURCEE
MENU
y
z
Power Indicator
Remote control sensor
P (Power)
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount
of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
10
English
UC6900 호주_중아, UC6000 구주 호텔.indd 10
Input
Video Audio (L/R) RGB
0 0 0

Viewing the Control Panel

Toggles between all the available input sources. In the on-screen menu, use this
button as you would use the ENTERE button on the remote control.
Displays an on-screen menu, the OSD (on screen display), of your TV's features.
Adjusts the volume. In the OSD, use the y buttons as you would use the
◄ and ► buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the
▼ and ▲ buttons on the remote control.
Blinks and turns off when the power is on and lights up in standby mode.
Aim the remote control towards this spot on the TV.
Turns the TV on or off.
Output
Video + Audio (L/R)
Only TV or DTV output is available
Power Indicator / Remote control sensor
2010-04-27 오후 2:24:39