Fn button: White balance
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can select the most appropriate white balance setting for
a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM (
) menu of the
White Balance and place a sheet of
white paper in front of the camera so
that the LCD monitor shows only white.
2. MENU/OK button: Selects previous
OK
OK button: Selects previous
custom white
balance.
Shutter button: saves new custom white balance.
– The custom white balance value will be applied, starting with the
next picture you take.
– The user confi gured white balance will be remain effective until it is
overwritten.
042
Fn button: Exposure compensation
Fn button: Exposure compensation
This camera automatically adjusts the exposure according to the ambient
lighting conditions.
You can also select the exposure value by using the Fn button.
Compensating Exposure
1. Press the Fn button, and then use the
Up/Down button to select the exposure
compensation (
compensation menu bar will appear as
shown.
2. Use the Left/
White paper
desired exposure compensation factor.
3. Press the Fn button again. The value you set will be saved and the
Exposure Compensation setup mode will close. If you change the
exposure value, the exposure indicator (
bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the
exposure and the LCD monitor should appear white or you may not
get good pictures.
) icon. The exposure
) icon. The exposure
Left Right button to set the
Left/
EXPOSURE VALUE
-2
-1
0
+1
+2
0
) will be displayed on the
) will be displayed on the