Sound; Connecting An External Device (Usb) - Samsung Digimax V10 User Manual

Sound

If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Sound] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Sound] sub menu : Off/ Low/ Medium/ High
5. Press the menu button twice and the menu will disappear.

Connecting an External Device (USB)

You can select an external device to which you want to connect the camera using the USB
cable.
Selecting an External Device
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [USB] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[Computer]
[Printer]
5. Press the menu button twice and the menu will disappear.
: Select this if you want to connect the camera to your PC.
Refer to page 120 for instructions on how to connect the camera to your
PC.
: Select this if you want to connect the camera to your printer.
Refer to page 83 for instructions on how to connect the camera to your
printer.
3072
Setup
D & Time Off
lmprint Low
Sound Medium
Back: Set : OK
3072
Setup
lmprint
Sound Computer
USB Printer
Back: Set : OK
93