Table of Contents
Advertisement
3
Using the Product
3-1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the [POWER
] button on the remote control.
•
You can also use the [
•
The message <Select the OSD Language.> is displayed.
2. Press the [
] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [
choice.
3. Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [
•
We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
•
<Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo>
mode and you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
4. Press the [
] button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [
choice.
5. Press the ▲ or ▼ button to select <Air> or <Cable>, then press the [
•
<Air>: <Air> antenna signal. / <Cable>: <Cable> antenna signal.
•
In Cable mode, you can select the correct signal source among <Digital & Analogue>, <Digital>, and <Analogue> by
pressing the ▲, ▼, ◄ or ► button, then press the [
signal source for both Analogue and Digital. Contact your local cable company to identify the type of cable system
that exists in your particular area.
6. Press the ▲ or ▼ button to select the channel source to memorise. Press the [
•
When setting the antenna source to <Cable>, a step appears allowing you to set a value for the digital channel
search. For more information, refer to <Channel> → <Auto Store>.
•
<Digital & Analogue>: Digital and Analogue channels.
•
<Digital>: Digital channels.
•
<Analogue>: Analogue channels.
•
The channel search will start and end automatically.
•
Press the [
•
After all the available channels are stored, the message Set the <Clock Mode> is displayed.
7. Press the [
] button.
Press the ▲ or ▼ button to select <Auto>, then Press the [
•
If you select <Manual>, <Set current date and time> is displayed.
•
If you have received a digital signal, the time will be set automatically. If not, select <Manual> to set the clock.
Using the Product
] button on the TV.
] button at any time to interrupt the memorisation process.
] button.I
] button.
] button. If you have Digital cable, select the cable system
] button to select <Start>.
] button.
] button to confirm your
] button to confirm your
3-1
Hide quick links:
Advertisement
Table of Contents
