Proper Selection Of The Power Supply Cord - Olympus DSX1000 Instructions Manual

9.

Proper selection of the power supply cord

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to
"Specifications" and "Certified Cord" below:
Caution : In case you use a non-approved power supply cord for Olympus products, Olympus can no longer
warrant the electrical safety of the equipment.
Voltage rating
Current rating
Temperature rating
Length
Fittings configuration
A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked
with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of the
agencies listed in Table 1. In case you are unable to buy locally the power supply cord which is approved by one of
the agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized
agencies in your country.
Country
Argentina
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Ireland
9. Proper selection of the power supply cord
Downloaded from ManualsNet.com
125 V AC (for 100-120 V AC area) or, 250 V AC (for 220-240 V AC area)
6 A minimum"60 ˚C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on IEC
configuration appliance coupling.
Agency Certification mark
IRAM
SAA
ÖVE
CEBEC
CSA
DEMKO
FEI
UTE
VDE
NSAI
search engine
Specifications
Table 1 Certified cord
Country
Italy
Japan
Netherlands
Norway
Spain
Sweden
Switzerland
United
Kingdom
U.S.A.
Agency Certification mark
IMQ
JET
KEMA
NEMKO
AEE
SEMKO
SEV
ASTA
BSI
UL
DSX1000
51