Preset Timing Modes - Samsung SyncMaster P42HN User Manual

Recommended
PowerSaver
This PDP Display has a built-in power management system called PowerSaver. This system saves
energy by switching your PDP Display to low-power mode when it has not been used for a certain
amount of time. The PDP Display automatically returns to normal operation when you press a key on
the keyboard. For energy conservation, turn your PDP Display OFF when it is not needed, or when
leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant
video card installed in your computer. Use the software utility installed on your computer to set up this
feature.
PowerSaver (When used as a Network PDP Display)
Power Indicator
Power Consump-
tion
PowerSaver (When used as a normal PDP Display)
Power Indicator
Power Consump-
tion

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjusts the screen as follows.
Display Mode
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
VESA, 640 x 480
VESA, 640 x 480
Specifications
CPU
P3.0 GHz 512 M
State Normal Opera-
P42H(N)
P50H(N)
State Normal Opera-
P42H(N)
P50H(N)
Horizontal
Frequency
(kHz)
31.469
31.469
31.469
35.000
49.726
68.681
37.861
37.500
RAM Ethernet OS
100 M / 1 Windows
G XP
Power saving
tion mode
Green Green, Blinking
380 W Less than 5 watts Less than 5 watts
470 W
Power saving
tion mode
Green Green, Blinking
380 W Less than2 watts Less than2 watts
470 W
Vertical Fre- Pixel Clock
quency (Hz) (MHz)
70.086 25.175
59.940 25.175
70.087 28.322
66.667 30.240
74.551 57.284
75.062 100.000
72.809 31.500
75.000 31.500
87
Application
WMP 9 or lat-
er
Power off
EPA/ENERGY
2000
Red
Power off
EPA/ENERGY
2000
Red
Sync Polarity
(H/V)
+/-
-/-
-/+
-/-
-/-
-/-
-/-
-/-