Table of Contents
Advertisement
Connections
Connecting Cables
Connect the power cord for your monitor to the POWER port on the back of the
monitor.
Plug the power cord for the monitor into a nearby outlet.
Use a connection appropriate for your computer.
•
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
•
Connect the monitor to the Macintosh computer using the D-sub connection
cable.
Note
If the monitor and the computer are connected, you can turn them on and use them.
Connecting USB
Note
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by
connecting them to the
The
USB port of the monitor supports High-Speed Certified USB 1.1.
Using the D-sub (Analog) connector on the video card.
[VGA IN]
Connected to a Macintosh.
USB port of the monitor without connecting them to the PC.
Advertisement
Table of Contents
