Table of Contents
Advertisement
Overwriting existing name and number information
You can overwrite existing information using separate actions in both the name
and number fields. Follow these instructions:
1.
At the Phone Book (options) screen, press
name or number field. When highlighted, press
2.
To overwrite, press
3.
Enter the new information.
4.
Press
Adding pauses
When you call automated systems (like banking services), you are often
required to enter a password or account number. Instead of manually entering
the numbers each time, you can store the numbers in your Phone Book
separated by special characters called pauses.
•P pause: A hard pause stops the calling sequence.
•T pause: A 2 second pause stops the calling sequence for 2
seconds and then automatically sends the remaining digits.
Note: Multiple 2 second pauses can be entered to extend the length of a
pause. For example, 2 consecutive 2 second pauses cause a total pause time
of 4 seconds. However, keep in mind that pauses count as digits towards the
32 digit calling maximum.
Storing pauses in a phone book entry
To store a number in your Phone Book that contains pauses:
1.
Enter the phone number you want to store (such as the bank's teleservice
phone number).
2.
Press
3.
Press
4.
Press
44
, until you clear the existing name or number.
again to save your entry.
. The pause menu options display.
to highlight one of the three pause menu options offered.
to select an option.
to highlight an existing
.
Advertisement
Table of Contents
