Table of Contents
Advertisement
Character support: select a character
encoding type. When you select Automatic,
the phone switches the encoding type from
GSM-alphabet to Unicode if you enter a
Unicode character. Using Unicode encoding
will reduce the maximum number of
characters in a message to about half. If this
menu is not shown, your phone provides
automatic character encoding by default.
Bearer selection: select either GSM or
GPRS preferred, depending on your
network.
• Block list: specify phone numbers from
which you want to reject messages.
• Current profile: select an SMS setting
profile.
• Profile settings: set the properties of each
profile:
Service centre: store or change the
number of your SMS server.
Default destination: enter the default
destination. It will be displayed in the first
field on the destination field.
Default type: set the default message type.
The network can convert messages into the
selected format.
Default validity: set the length of time
your messages are stored in the SMS server.
Setting name: enter a profile name.
Multimedia message
You can configure default MMS settings.
• Sending settings: set up the options for
sending MMS messages:
Delivery report: set the network to inform
you when your messages are delivered.
Hide address: set your address to be
hidden from the recipient's phone.
Read reply: send a read-reply request
along with your messages.
(Menu 5.5.2)
69
Advertisement
Table of Contents
