Using The 10-Key Pad ( Bn; Using The Setting Button - Casio CTK2100ES1A User Manual

General Guide
Using the 10-key Pad (
Use the number buttons and the [–] and [+] buttons to change
the settings of the parameters that appear in the upper left
area of the display.
Setting
M d e r n P n o
Number Buttons
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example: To enter tone number 005, input 0 3 0 3 5.
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
[–] and [+] Buttons
You can use the [+] (increase) and [–] (decrease) buttons to
change the displayed number or value.
• Holding down either button scrolls the displayed setting.
• Pressing both buttons at the same time will revert to the
initial default setting or the recommended setting.
E-4
)
bn

Using the Setting Button (

3
Use the Setting button (
select the reverb type, pedal effect, etc.
1.
3
Press .
T r a n s .
2.
3
Next press until the parameter whose setting
you want to change is displayed.
3
Each press of cycles through the available parameters.
Parameter
1 Transpose
2 Accompaniment Volume
3 Song Volume
4 Tuning
5 Reverb
6 Voice Fingering Guide
7 Note Guide
8 Performance Evaluation
9 Phrase
10 Sampling Start
11 Keyboard Channel
12 Navigate Channels
13 Local Control
14 Accomp Out
15 Pedal Effect
3.
When the parameter you want is displayed, use
bn
(10-key) to change its setting.
• The parameter setting will disappear from the upper left
area of the screen if you do not perform any operation
for some time.
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page E-6).
)
3
) to access settings that let you
Setting
Parameter
Display See Page
Trans. E-11
AcompVol E-31
Song Vol E-17
Tune E-11
Reverb E-10
Speak E-22
NoteGuid E-23
Scoring E-23
PhraseLn E-23
SmplAuto E-13
Keybd Ch E-33
Navi. Ch E-33
Local E-34
AcompOut E-34
Jack E-10