Menu functions
Creating a profile
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Specify profile parameters:
•
Profile name: enter a profile name.
•
Homepage URL: enter the URL address of the
page to be used as your homepage.
•
Proxy: activate or deactivate the proxy server.
•
IP address: enter the IP address of the proxy
server.
•
Port: enter the port number of the proxy
server.
•
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
•
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
•
DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
•
Bearer: select the network bearer type.
94
•
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following options:
•
Edit: edit the selected profile.
•
Delete: delete the profile.
•
Add new connection: add a new profile.