Table of Contents
Advertisement
5
Send to send the message.
Select
•
If you decide not to send a message immediately,
you can save it to the draft folder for future use.
•
If an error occurs while you are sending a message,
it will be saved in the outbox so you can try to
resend it later.
•
When a message is sent successfully, it will be
saved in the sentbox.
›
Set up an MMS profile
To send and receive multimedia messages, you must
activate a connection profile for connecting to the MMS
server. In addition to profiles that are preset by your service
provider, you can add your own connection profile.
1
In Menu mode, select
Network
Connections
→
2
Create.
Select
42
Communication
Settings
Connectivity
→
Yes.
→
3
Customise the parameters for the connection profile.
Option
Set name
Access name
Auth type
User ID
Password
Protocol
Home URL
Proxy
address
→
Linger Time
(Sec.)
Advanced
settings
Function
Enter the name for the profile.
Enter the access point name.
Select an authentication type.
Enter your user name.
Enter your password.
Select a network protocol.
Enter the MMS server address.
Enter the address of the proxy
server.
Enter how long the device will wait
for responses from the network.
Customise IP and DNS addresses
and traffic class.
Advertisement
Table of Contents
