Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth rollers
• They help to glide
over the skin more
easily.
5 Foil frame release
buttons
6 Power switch
10
Back
a
b
c
7 Lamp display
a. Battery capacity
lamp
b. Charge status
lamp ( )
c. Switch lock lamp
( )
Appliance socket
Outer foil section
System outer foil
release buttons
Trimmer
Trimmer handle
B AC adaptor (RE7-87)
Adaptor
Power plug
Cord
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug
into the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor
after charging is completed�
Note
You cannot operate the shaver while charging.
Appliance plug
Accessories
C Travel case
D Cleaning brush
E Oil
2
1