Hardware Overview; Front Panel - D-Link DXS-3600-32S Quick Installation Manual

Hardware Overview

Front Panel

Port
SD Card Slot
Management port (MGMT)
Console Port
10 Gigabit ports
Expansion Module Slot
3
Description
This port can be used to insert an external SD memory card. The maximum
capacity SD card that can be inserted into this port is 32Gb.
This is a 10/100/1000Mbps Out-Of-Band management port that can be used to
configure this switch without being connected to the network.
This port is an RJ-45 connection port that can be used to connect to the Command
Line Interface (CLI) of this switch for configuration, management and monitoring.
This port uses a special console cable (included with the packing) with a DB9
interface to connect the Switch to a PC's COM port.
This switch is equipped with SFP/SFP+/WDM ports. These ports can operate at
10Gbps speeds and support a vast collection of SFP/SFP+/WDM transceivers.
This slot can be equipped with several kinds of additional modules. These modules
are not included and should be bought separately:
• DXS-3600-EM-4XT (Four 10GBase-T Copper ports)
• DXS-3600-EM-8T (Eight 1000Base-T Copper ports)
• DXS-3600-EM-4QXS (Four 40Gbps QSFP+ transceiver slots)
• DXS-3600-EM-8XS (Eight 10Gbps SFP+ transceiver slots)
• DXS-3600-EM-Stack (Two 120Gbps CXP Stacking ports)