Re-Recording Part Of A Recorder Song (Punch-In Recording; Deleting Recorder Data - Casio Celviano 6ES1A User Manual

Deleting Recorder Data

You can use the procedures below to delete an entire
recorder song or to delete a specific track of a recorder
song.
Deleting a Recorder Song
1.
Use the  (RECORDER) button to cycle
through the recorder modes until the
RECORDER lamp is lit (playback mode).
Lit: Playback mode
2.
While holding down the
button, press the 
This displays the recorder song selection screen.
3.
(w, q) buttons to select the
Use the 
recorder song you want to delete.
4.
Hold down the  (RECORDER) button until
the message "Sure?" appears on the display.
5.
Press the  (YES) button to delete the
recorder song.
• To cancel the delete operation, press the
button.
 (FUNCTION)
(RECORDER) button.

(NO)
Deleting a Recorder Song Track
1.
Perform steps 1 through 3 of the procedure
under "Deleting a Recorder Song" to select
the recorder song that contains the track you
want to delete.
2.
Press the  (i) button.
This displays the track selection screen.
3.
(w, q) buttons to select the
Use the 
track you want to delete.
4.
Hold down the  (RECORDER) button until
the message "Sure?" appears on the display.
5.
Press the  (YES) button to delete the track.
• To cancel the delete operation, press the
button.
Re-recording Part of a
Recorder Song
(Punch-in Recording)
You can use punch-in recording to re-record a specific
part of recorder song that you want to improve or
correct.
Mistake
Playback
Use punch-in
recording to re-record
only this part.
1.
Turn on the recorder, enter the record mode,
and select the track that contains the section
you want to re-record.
• See step 3 under "Recording to a Specific Track
(Part)" (page E-35).
2.
Hold down the  (RECORDER) button until
the punch-in recording screen appears on the
display.
Recording Your Keyboard Play
 (NO)
E-37