Motorola RMU2080d User Manual page 57

7. When the cloning is completed, the Source
Radio audible voice will announce either
"successful" (cloning is successful) or "fail"
(cloning process has failed). If the Source
Radio is a display model radio, it will either
show 'Pass' or 'Fail' on the display (a voice
announcement will be played within 5 seconds).
8. Once the cloning process is completed, turn the
Radios OFF and ON again to exit "Clone"
All manuals and user guides at all-guides.com
the radio.
4. Ensure that there is no debris in the charging
tray or on the radio contacts.
5. Ensure that the Target radio is turned ON.
6. Ensure that the Source radio is in cloning mode.
7. Ensure that the two radios are both from the
same frequency band, same region and have
the same transmission power.