Cruising In Other Conditions - Yamaha F80A Owner's Manual

Operation
desired position using the power trim / tilt
switch.
UP
UP
DN
UP
3. To return the outboard motor to the nor-
mal running position, press the power
trim / tilt switch and slowly tilt the out-
board motor down.
EMU28191

Cruising in other conditions

Cruising in salt water
After operating in salt water, wash out the
cooling water passages with fresh water to
39
prevent them from becoming clogged with
salt deposits.
NOTE:
For cooling system flushing instructions, see
page 41.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(not available for some models) if you use
the outboard motor in turbid (muddy) water
conditions.
ZMU01935
ZMU04235