Table of Contents
Advertisement
5. Trimmer
Set a position where marking
sliding down, hook right and left side of hooks at upside.
5. TROUBLESHOOTING GUIDE
< SYMPTOM >
Motor does not rotate.
Does not charge
2 , and hook lower side of two hooks. / With a position 8mm
—
<CHECK CHARGING ADAPTOR.>
Connect to rated voltage. OK if it is
approximately
DC 1.5V-3.0V between
<CHECK CONTACT CONDITIONS OF
Check for proper contact between negative
contactspring and
terminal pin when terminal pin is depressed.
< CAUSE >
-
.
OK
SWITCH.>
< REMEDY
NO
Replace charging
adaptor.
NO
Repair contact
negative con
tact spring.
Advertisement
Table of Contents
