OPENING THE AIR MACHINE 1. Remove the two Medco Plug locks from the machine with the keys provided. Rotate the lock counter clockwise until you hear a click, pull the locks completely out. 2. Use the 5/16 black allen wrench provided for you to loosen e bolts where the locks were, turning bolts counter clockwise.
Page 3
2. K14-9 Remote unit (operates off a remote compressor already installed) 3. K14-AW Same as K14-A models but equipped with a water application. 4. K14-9 AW Same as K14-9 Remote unit is equipped with water application. The cabinets for the models listed above are made out of 10 and 14 gauge regular steel and are painted with high quality powder coat paint or are made out of a polished stainless steel.
SERVICE AND WARRANTY WARRANTY STARTS FROM DATE OF INVOICING Air Compressors are warranted from defects in materials and workmanship for 1 ½ year. Multi coin timers are warranted from defects in materials and workmanship for one year. All other parts of the unit are warranted for 30 days. Warranty covers parts and materials only, warranty does not include Labor, freight costs of any kind.
1. Cabinet is constructed of heavy duty 10 & 14 gauge stainless steel K14-9 A. Has the same features as the K14-A, but has no compressor. The K14-9 model has 110 volt solenoid valve for use with a compressor already installed at the location.
ELECTRICAL REQUIREMENTS K14-750 Model Elctrical Requirements are: A. 110 Volts AC Current B. 20 Amp Circuit Breaker C. 60 HZ Single Phase K14-9 Remote Air Model Electrical Requirements are: A. 110 Volts AC Current B. 20 Amp Circuit Breaker C. 60 HZ Single Phase K14- AW ( Air &...
Page 7
To operate K14-9 Remote air free models follow these instructions: A. Depres button once on machine and machine is ready for use. Repeat steps A & B as you did for the K14-A models. For maximum protection from electrical shock test the unit at least once a month.
BASIC MAINTENANCE This part of the manual is designed to help with some basic maintenance tips for your Air King air machine. The machine is basically maintenance free but there are a few things you should do to keep it this way. 1.
Page 9
AIR MACHINE TIMERS Air King of America, Inc. air machines models K4-A, K14-9 and K14-AW may be equipped with two different types of timers. 1. Timer Multi Coin Infitec ASCR540 Features Include: A. Adjustable time B. Single or Multi Coin start C Low Voltage to coin switch D.
Page 13
Wiring Diagram for a K14- AW 1511 Timer...
Page 14
AIR MACHINE INSTALLATION & MOUNTING Mounting air machine to cement or brick wall: 1. Before mounting install a six inch piece of carpet or weather stripping approximately ¼ " thick in the center of the back of the machine. This will help reduce noise and vibration of the machine. recommend that the machine not be mounted on a metal wall.
Page 15
AIR MACHINE INSTALLATION & MOUNTING cont. The air machine can be mounted on a permanent stand, a vault ready stand or a single or dual reel assembly cabinet. All three stands can be mounted to present concrete at the site, or a pad can be poured to mount them. See diagram below for mounting.
Page 16
AIR MACHINES INSTALLATION & MOUNTING cont.
TROUBLE SHOOTING This part of the manual was designed to help you with any minor problems or repairs you may have with your AIR KING air machine. Problem: Air machine will not start: A. Check the circuit breaker in building, if the breaker in the building has not kicked out, go out to the machine and do the following.