Table of Contents
Advertisement
User manual
SAFETY INSTRUCTIONS
Before using the appliance, read these safety
instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide
important safety warnings, to be observed at all
times. The manufacturer declines any liability for
failure to observe these safety instructions, for
inappropriate use of the appliance or incorrect setting of
controls.
Very young children (0-3 years) should be kept
away from the appliance. Young children (3-8 years)
should be kept away from the appliance unless
continuously supervised. Children from 8 years old and
above and persons with reduced physical, sensory
or mental capabilities or lack of experience and
knowledge can use this appliance only if they are
supervised or have been given instructions on safe
use and understand the hazards involved. Children
must not play with the appliance. Cleaning and user
maintenance must not be carried out by children
without supervision.
Never open the door forcibly or use it as a step.
PERMITTED USE
CAUTION: The appliance is not intended to be
operated by means of an external switching device, such
as a timer, or separate remote controlled system.
This appliance is intended to be used in household and
similar applications such as: staff kitchen areas in shops,
offices and other working environments; farm houses; by
clients in hotels, motels, bed & breakfast and other
residential environments.
Do not load the machine above the maximum
capacity (kg of dry cloth) indicated in the programme
table.
This appliance is not for professional use. Do not use
the appliance outdoors.
Do not use any solvents (e.g. turpentine, benzene),
detergents containing solvents, scouring powder, glass
or general purpose cleaners, or flammable fluids; do
not machine wash fabrics that have been treated
with solvents or flammable liquids.
INSTALLATION
The appliance must be handled and installed by two
or more persons - risk of injury. Use protective gloves
to unpack and install - risk of cuts.
If you want to stack a dryer on top of your washing
machine, first contact our After-Sales Service or your
specialist dealer to verify whether this is possible. This
is only possible if the dryer is attached to the washing
machine by means of appropriate stacking kit available
through our After- Sales Service or your specialist dealer.
8
IMPORTANT TO BE READ AND OBSERVED
Move the appliance without lifting it by the
worktop or top lid.
Installation, including water supply (if any) and
electrical connections and repairs must be carried out by
a qualified technician. Do not repair or replace any part
of the appliance unless specifically stated in the user
manual. Keep children away from the installation site.
After unpacking the appliance, make sure that it has not
been damaged during transport. In the event of
problems, contact the dealer or your nearest After-sales
Service. Once installed, packaging waste (plastic,
styrofoam parts etc.) must be stored out of reach of
children - risk of suffocation. The appliance must be
disconnected from the power supply before any
installation operation - risk of electric shock. During
installation, make sure the appliance does not damage
the power cable - risk of file or electric shock. Only
activate the appliance when the installation has been
completed.
Do not install your appliance where it may be
exposed to extreme conditions, such as: poor
ventilation, temperatures below 5 °C or above 35 °C.
When installing the appliance make sure that the
four feet are stable and resting on the floor, adjusting
them as required, and check that the appliance is
perfectly to level using a spirit level.
If the appliance is being installed on wood or
"floating" floors (certain parquet and laminate materials),
secure a 60 x 60 x 3 cm (at least) sheet of plywood to the
floor then place the appliance on top of this.
Connect the water inlet hose(s) to the water supply
in accordance with the regulations of your local water
company.
For cold fill only models: do not connect to the hot
water supply.
For models with hot fill: the hot water inlet
temperature must not exceed 60 °C.
The washing machine is fitted with transport bolts to
prevent any possible damage to the interior during
transport. Before using the machine, it is imperative that
the transport bolts are removed. After their removal,
cover the openings with the 4 enclosed plastic caps.
After installation of the device, wait a few hours
before starting it so that it acclimates to the
environmental conditions of the room.
Make sure that the ventilation openings in the base
of your washing machine (if available on your model) are
not obstructed by a carpet or other material.
Advertisement
Table of Contents
