Cisco Linksys WRT350N Quick Installation Manual page 8

L
Wireless SSID Broadcast. When
wireless clients survey the local
area for wireless networks to
associate with, they will detect
the SSID broadcast by the
Router. To broadcast the
Router's SSID, keep the default,
Enabled. If you do not want to
broadcast the Router's SSID,
then select Disabled.
M
Change these settings as
described here and click the
Save Settings button to apply
your changes.
N
Power your broadband
modem off and back on
again.
O
Restart or power on your PCs so
they can obtain the Router's
new settings.
P
To test the Router's settings,
open your web browser from
any computer. In the browser's
Address
field, enter
www.linksys.com/registration
and press the Enter key.
Congratulations! The installation of
the Wireless-N Gigabit Router with
Storage Link is complete.
8
NOTE: For more advanced settings and
security options, refer to the User Guide
on the Setup CD-ROM.