Maintenance And Care - Stihl HL 94 Instruction Manual

English
20.2 Spacer, shim
WARNUNG
To reduce the risk of damage to persons or
objects from contact with hot parts, never oper‐
ate the machine without a spacer, or with the
spacer damaged.
The spacer (arrow) is integrally molded to the
cover.

21 Maintenance and Care

The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than nor‐
mal or under difficult cutting conditions (extensive
dust, etc.).
Complete machine
Control handle
Air filter
Fuel tank
Manual fuel pump (if
present)
Fuel pickup body in fuel
tank
22
Visual inspection (safe
condition, leaks)
Clean
Replace any damaged
parts
Function test
Visual inspection
Clean the filter housing
1)
Replace the felt filter
Clean
check
Have repaired by a spe‐
2)
cialist dealer
Have checked by
2)
dealer
Have replaced by serv‐
2)
icing dealer
► Check the spacer (1) for damage.
► If the spacer (1) is damaged, have the cover
replaced immediately.
20.3 Antivibration element
A vibration-absorbing rubber element is installed
between the powerhead and the shaft. Have it
checked in the event of noticeable wear or con‐
stantly increased vibration.
X X
X
X
X X
X
21 Maintenance and Care
X X
X
X X
X
X
X X
0458-519-8321-D
X
X
X
X