Error Message List - Nintendo 64DD Instruction Manual

[[page 29]]

7 ERROR MESSAGE LIST

Cause of the error
There may be a fault in the 64DD or a
01
defect in the disc.
There is a chance that the eject button
02
had been pressed half way during access.
03
There may be a fault in the 64DD.
04
There may be a defect in the disc.
The clock function may have stopped
temporarily.
If an error message continues to be
05
displayed after you have set the date and
time repeatedly, the built-in lithium
batteries may be exhausted.
11
There may be a defect in the disc.
21
22
There may be a fault in the 64DD or a
23
defect in the disc.
24
25
31
32
There may be a fault in the 64DD or the
33
Nintendo 64, or a defect in the disc.
34
35
The 64DD and the Nintendo 64 may not
be connected correctly.
41
There may be dust or foreign objects in
the 50PIN connector on top of the 64DD
main unit, or the 50PIN expansion
connector on the base of the Nintendo
64.
Is the disc inserted?
42
The eject button may not have been
pressed in fully.
The power switch may have been turned
42
on and off during access.
The memory expansion pack may not be
44
inserted in the 36PIN connector on the
Measure
Please make inquiries at your nearest Nintendo
"customer advice counter" (see page 35) or the
shop you purchased it from.
Please act according to the game's instructions.
For more details, please refer to each game's
instruction manual.
Please act according to the game's instructions.
For more details, please refer to each game's
instruction manual.
Please make inquiries at your nearest Nintendo
"customer advice counter" (see page 35) or the
shop you purchased it from.
Connect them correctly in accordance with "4.
How to connect it up (2. Connecting the Nintendo
64)."
>page 14
Blow on the part with the foreign object attached
to it to remove it.
Insert a disc into the 64DD.
Remove the disc and insert it again.
Turn off the power switch, and make sure that the
power light is off before turning the power switch
on again.
Connect it correctly in accordance with "How to
connect it up (1. Connecting the memory