Casio Exilim MA1010-BMF User Manual page 17

3.
With your computer
turned on, connect the
camera to it.
Charging will start at
this time.
The back lamp will light red
while charging is in
progress and go out after
charging is complete. It
takes about 170 minutes to
achieve a full charge.
Charging may take longer
depending on charging
conditions.
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
4.
After charging is complete, disconnect the USB cable from the camera
and then from the computer.
IMPORTANT!
• Charging is not performed when connected to the USB port of a printer, TV, etc.
• Charging will not start whenever the battery temperature is 0°C (32°F) or below or
60°C (140°F) or above.
• Charging is not performed while the connected computer is in the hibernate mode.
• Depending on the setup of your computer, you may not be able to charge the
camera's battery over a USB connection. If this happens, use of the charger that
comes with the camera is recommended.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the back lamp flashing red.
USB port
USB/AV port
Making sure that the
connector is towards the lens side, connect the cable
to the camera.
Description
Charging
Abnormal ambient temperature,
charging taking abnormally long,
or battery problem (page 126)
Charging complete
17
USB cable
(included with camera)
Large connector
Small connector
mark on the USB cable
Back lamp
Quick Start Basics