Preparation - Panasonic ES-LS9A Operating Instructions Manual

Preparation

Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear
terminals.
1
Insert the appliance plug
into the self-cleaning
recharger�
2
Remove the protective cap
while pressing the side of
the cap and insert the
shaver into the self-
cleaning recharger�
• Slowly insert the shaver into
the self‑cleaning recharger
taking care not to damage the
system outer foil.
3
Plug the adaptor into a household outlet�
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
• If the shape of the plug does not fit the power
outlet, use an attachment plug adaptor of the
proper configuration.
4
Disconnect the adaptor after charging is
completed�
Quick charge
Even though the battery runs out, you can shave
once after 3‑minute charge.
(This will differ depending on usage.)
2
3
The number of the battery
1
capacity lamp will increase
as charging progresses.
Notes
• When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C (50 °F – 95 °F). It may take longer to
charge, or the charge status lamp ( ) will blink
quickly and the battery may fail to charge properly in
extremely high or low temperatures.
While charging
glows.
After charging is
completed
"100%" appears and then
turns off after 5 seconds.
13