Creating A Dynamic Photo Image; Step 1: Shoot The Image Into Which You Want To Insert An Built-In Subject; Step 2: Create The Dynamic Photo Image - Casio EXILIM EX-ZR100 User Manual

Creating a Dynamic Photo Image

Your digital camera comes with a number of subjects in its built-in memory ("built-in
subjects"). You can use these built-in subjects to create Dynamic Photo images by
inserting them into your original snapshots or movies.
Step 1: Shoot the image into which you want to insert
1.
In the REC mode, compose the image and press
the shutter button to shoot a standard
snapshot.
You will insert the built-in subject into the snapshot you
shoot here.

Step 2: Create the Dynamic Photo image.

Now simply insert a built-in subject into the snapshot or movie you shot in step 1 to
create your own original Dynamic Photo image.
1.
Press [p] to enter the PLAY mode.
2.
Perform the following operation on the camera
[MENU] * PLAY tab * "Dynamic Photo".
3.
Use [4] and [6] to select the background image
you want and then press [SET].
Select the image you want to use as the background.
Here, select the image you recorded in step 1 of this
procedure.
* Only images that are able to be used as background images
will appear for selection at this time.
• Only an image that satisfies the following conditions can be used as a
background image.
– A snapshot or movie recorded with this camera or a snapshot transferred to
this camera's memory using Photo Transport
– A snapshot with an aspect ratio of 4:3
B
an built-in subject.
3
Creating a Dynamic Photo Image