Menu Screen Operation Buttons
[ ] [ ] Select tabs. [ ] is also used to apply a setting.
[ ] [ ] Select a setting option.
[SET]
Applies the selected settings.
[MENU] Exits the menu screen.
The following is the procedure for menu operations in the REC
mode.
1.
In the REC mode, press [MENU].
This displays the menu screen.
2.
Use [ ] and [ ] to select the tab where the
item you want to configure is located.
Here, we will select the "REC" tab.
3.
Use [ ] and [ ] to
select the item you
want to configure and
then press [ ].
Example: Select "Focus" and
then press [ ].
4.
Use [ ] and [ ] to select the setting you want.
5.
Apply the setting.
• Pressing [SET] applies the selected setting and exits the
menu screen.
• Pressing [ ] instead of [SET] applies the selected setting
and returns to the menu screen. You can then continue
configuring other settings, if you want.
• To select another tab, press [ ], use [ ] to return to the
tab and then use [ ] and [ ] to switch to another tab.
IMPORTANT!
• Entering the easy mode (page 65) changes display
contents to four menu items each, using larger size
characters. The easy mode also displays simple onscreen
help.
51
GETTING READY