Wiring; Ducting - Broan L100E User's And Installer's Manual

4. WIRING

Electrical wiring must be done by a qualifi ed person(s) in accordance with all applicable codes and standards, including fi re-rated
construction codes and standards.
BLACK
TO
BLACK
WHITE
TO
WHITE
Ventilator can be wired from outside of housing.
Use UL approved connectors to wire per local codes.

5. DUCTING

Remove shipping tape from damper.
Remove the shipping tape from the damper fl ap and make sure that damper fl ap opens and closes freely inside the ductwork. Use duct
tape to make ductwork connections secure and air-tight.
Remove shipping ring from blower inlet.
Remove the shipping ring from the blower inlet before operating the ventilator.
!
WARNING
TOP / BACK
OF HOUSING
GROUND TO
WIRING PLATE
WIRING
PLATE
LINE IN
CAUTION
CAUTION
WIRING PLATE POSITION
HORIZONTAL POWER
CABLE CONNECTION
Wiring plate mounts to side or top of housing.
7
VERTICAL
POWER CABLE
CONNECTION