Table of Contents
Advertisement
CD edit switch (EDIT)
S808:
Repeat switch (REPEAT)
S809:
Random play switch (RANDOM)
- Indicated voltage values are the standard values for the unit
measured by the DC electronic circuit tester (high-impedance) with
the chassis taken as standard. Therefore, there may exist some
errors in the voltage values, depending on theinternalimpedance of
the DC circuit tester.
No mark
: CD Stop
( )
: CD Play [1 kHz, L+R, 0 dB]
- Important safety notice:
Components identified by
important for safety.
Furthermore, special parts which have purposes of fire-retardant
(resistors), high-quality sound (capacitors), low-noise (resistors),
etc. are used.
When replacing any of components, be sure to use only
manufacturer's specified parts shown in the parts list.
- The supply part number is described alone in the replacement parts
list.
- Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
Cover the parts boxes made of plastics with aluminum foil.
Ground the soldering iron.
Put a conductive mat on the work table.
Do not touch the legs of IC or LSI with the fingers directly.
- Voltage and signal line
mark have special characteristics
16
Advertisement
Table of Contents
