KitchenAid Pro 12 Instructions Manual page 11

Operating Your Coffee Maker
WARNING
!
Electrical Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground
prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these
instructions can result in
death, fire or electrical
shock.
TO MAKE COFFEE
1. Lift the Water Tank Lid and fill the
Water Tank with the fresh, cool
water needed to make the number of
cups you want. A Water Level
Indicator just in front of the Water
Tank Lid shows the amount of water
in the tank, in cups, or use the
Water Level Indicator located inside
the Water Tank.
External Water Level Indicator
Internal Water Level Indicator
2. Swing out the Brew Basket.
3. Insert a #4 cone paper filter in the
Brew Basket. NOTE: To ensure
proper fit, be sure to fold over the
bottom and side crimps of the filter.
4. Fill the filter with one rounded
scoop of ground coffee for each cup
you are making, using the included
scoop. Use more ground coffee for a
stronger brew, less for weaker. The
Coffee Strength Control at the front
of the Water Tank Lid can also
adjust coffee strength; turn it to the
left for stronger coffee, to the right
for weaker.
5. Swing the Brew Basket back into
position; it should snap into place.
NOTE: Make sure the tab at the
back of the Brew Basket snaps into
the slot at the front of the Water
Tank; if the basket is not firmly in
position it could swing out during
brewing, splashing hot water.
6. Close the Water Tank Lid.
11
M IN M IN
HR
PR O G
FF
O N /O
AU TO
1- 3
C UP S