Install The Remote Control Batteries; Connect The Antenna Or Cable - Philips 52PFL7403D User Manual

Step 3 Connect cables
Connect the antenna or cable, the power cord and all other devices to
the back of the TV as described in the following sections and in Connect
your devices on page 32.
Step 4 Secure the VESA-compliant wall bracket to the TV
WARNING: Only use the specified bolts (M6 for 32 inch
B
models, M8 for all other models) to secure the VESA-compliant
wall bracket to your TV. The specified bolts are designed to
match the weight of your TV.
Note: Depending on your VESA-compliant wall bracket, you may
D
need to separate the mounting plate from the wall bracket for
easier installation. Refer to your VESA-compliant wall bracket
documentation for instructions.
3.3

Install the remote control batteries

1. Open the battery cover on the back of the remote control.
2. Insert the 2 batteries supplied. Make sure the + and - ends of the
batteries line up correctly (inside of case is marked).
3. Close the cover.
Note: If you are not going to use the remote control for a long time,
D
remove the batteries.
EN-8
3.4

Connect the antenna or cable

This section describes how to connect your TV to an antenna, cable,
Direct Broadcast Satellite, and to a set-top box.
TV ANTENNA
R
L
Pr
Pb
Y
AV 1
HDMI 1 HDMI 2
Connect to an antenna
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
Contact your local content provider or your local electronics retailer if
you are unsure about what HDTV programs are available in your area.
Broadcasters are transitioning from analog to digital TV. This means that
a given broadcaster can have channels available either in analog or in
digital, or both analog and digital at the same time.
The TV has stereo sound if the broadcasting channel makes it available.
Connect to a cable
When your TV is connected to the cable socket, you may receive
free digital and high definition programming (depending on your cable
provider). Digital and high definition cable channels can be recognized
by the format of the channel number. The channel number includes a
dot "." For example, 11.1, 46.30, 108.201. Contact your cable provider
for more information.
Connect to a Direct Broadcast Satellite (DBS)
There are two main DBS systems: DirecTV and DishNetwork. These
systems require a separate, proprietary set-top box to decode signals
and send them to the TV. The set-top box contains a digital TV tuner
for receiving off-air digital television broadcasts.
Contact your local DBS provider for more information about the
connections and the TV channels.
Connect to a set-top box
A cable box or satellite set-top box can be connected to the TV
through the following connections:
• ANT
• A/V (Composite Video and Audio)
• S-Video
• YPbPr (Component Video Input)
• HDMI
For information about how to connect a set-top box, see the Quick Start
Guide provided.
Cable
SERV. U V V
R R
L L
SPDIF
OUT
Pr
Pb VIDEO L
S-VIDEO
Y R
DV D D I AUDIO D D
AV 2 AV 3 IN
HDMI 3