Table of Contents
Advertisement
Capture Mode
This sets the recording method at the time of capturing images.
* [Blank]
Single: Captures one image at a time.
* [ T ]
Continuous: Permits continuous capture of up to 3. The flash is disabled in this
mode.
* [ U ]
AEB (Automatic Exposure Bracketing): Permits 3 consecutive images taken in
the following order; standard exposure, underexposure and overexposure
compensation.
* [ / ]
Burst: Permits continuous photography while pressing and holding the shutter
button. As long as you hold the shutter button pressed, images are captured
until the memory capacity is full.
* [ . ]
Series+flash: Permits continuous capture of up to 3 images with flash.
* [ + ]
Pre-Shot: Lets you capture the background first, then have someone to capture
you in front of it. Refer to the section in this manual titled "Recording a Subject
onto an Existing Background Image" for further details.
* [ , ]
Couple Shot: Uses a "split-screen" feature to combine two shots. You can
include yourself in the shot. Refer to the section in this manual titled
" Combining Shots of Two People into a Single Image " for further details.
LCD Bright.
Adjust the brightness level of the LCD display to your desired setting.
The LCD becomes brighter with the
ment range is from -5 to 5.
Date Print
The date the image was captured will be printed on it. This function must be activated
before the image is captured.
* On / Off
EN-32
button and darker with the
button. The adjust
Hide quick links:
Advertisement
Table of Contents
