Viewing Snapshots And Movies On A Tv Screen - Casio EXILIM EX-Z350 User Manual

Viewing Snapshots and Movies on a TV Screen

1.
Use the AV cable that comes with the camera to connect it to the TV.
Yellow
TV Video
AUDIO IN jacks (white)
VIDEO IN jack (yellow)
Making sure that the
towards the lens side, connect the cable to the camera.
• Make sure that you insert the cable connector into the USB/
AV port until you feel it click securely into place. Failure to
insert the connector fully can result in poor communication or
malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown
in the illustration.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3.
Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the
AV cable is connected.
• You also can change the aspect ratio of the screen and the video output
system (page 112).
White
Audio
USB/AV port
mark on the AV cable connector is
70
AV cable (bundled)
Viewing Snapshots and Movies