Using Flash - Casio EXILIM EX-Z270 User Manual

Using Flash (Flash)
1.
In the REC mode, press [2]
( ) once.
2.
Use [4] and [6] to select the
flash setting you want and then
press [SET].
When the "R Panel" menu item
(page 138) is "Off" (so the Control
Panel is not displayed), pressing [2]
( ) will cycle through the available flash settings.
Auto Flash
>
Flash Off
?
Flash On
<
Soft Flash
_
Red Eye
¥
Reduction
3.
Press the shutter button to shoot.
< indicates the flash will fire.
• For information about Flash Range, see page 177.
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash does not fire.
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Soft flash always fires, regardless of exposure conditions
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject's eyes.
Back lamp
Flashes orange while the flash is charging to
indicate that image recording is disabled.
10
• You will not be able to take another flash
A
snapshot until the lamp stops flashing orange,
which indicates that charging is complete.
33
Flash
[2] ( )
Snapshot Tutorial