Planet BT-410U User Manual page 39

Bluetooth USB Adapter User Guide
‧ The remote device handles both audio input and output for this computer; there-
fore, this computer does not require a sound card, microphone, or speakers.
Configure the Audio Gateway Service
From the Windows system tray, right-click the Bluetooth icon, select Advanced Con-
figuration > Local Services, and then double-click the Audio Gateway service. Set the
common configuration properties of the service, and then click OK.
6.6.3 Bluetooth Serial Port
The Bluetooth Serial Port service enables a remote Bluetooth device to establish a
wireless serial connection with this computer. The wireless serial connection may be
used by applications as though a physical serial cable connected the devices.
To establish a Bluetooth Serial Port connection
The connection must be initiated from the remote device by the Bluetooth Serial Port
application.
Determine the communications port being used by this computer for the
Bluetooth Serial Port
In the Windows system tray, right-click the Bluetooth icon, select Advanced Configura-
tion, and then select the Local Services tab. The COM port assigned to this service is
the last item in the Bluetooth Serial Port service row. Configure the application on this
computer that will use this service to send its data to this COM.
Add a Bluetooth Serial Port
The Bluetooth Serial Port service has one pre-configured Bluetooth Serial Port, but
additional Bluetooth Serial Ports can be added as needed.
To add a port
1. From the Bluetooth Configuration Panel, Local Services tab, click Add Serial
Service.
2. In the properties dialog box, modify the properties:
3. Enter a unique name (fewer than 99 alphanumeric characters).
4. Select secure connection, if you want.
5. Select Startup Automatically, if you want
6. From the COM Port shortcut menu select a communications port that is not as-
signed to any other service.
7. Click OK.
To remove a Bluetooth Serial Port
From the Bluetooth Configuration Panel, Local Services tab, select the port to be
removed and then click Delete.
NOTE: The Delete button is only available when a Bluetooth Serial Port is selected.
6.6.4 Dial-up Networking Service
The Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth
device to use a modem that is physically connected to this computer. The remote
device can then access the Internet or log on to a remote network.
Configure the Dial-up Networking service:
From the Windows system tray, right-click the Bluetooth icon, select Advanced Con-
figuration > Local Services, and then double-click the Dial-up Networking service.
‧ Select the physical modem to be used from the Modems: shortcut menu.
‧ Set the common configuration properties of the service, and then click OK.
34