Toothbrush Handle - Philips sonicare 3000 Series Manual

14
English
Cleaning

Toothbrush handle

- Triple tone of low-med-high means the pressure
sensor feature has been activated. The battery
level indicator light will also blink green 2 times to
confirm activation.
- Triple tone of high-med-low means the pressure
sensor feature has been deactivated. The battery
level indicator light will blink amber 1 time to
confirm deactivation.
If you continue holding the power on/off button after
the three short beeps, the activate/deactivate
sequence repeats.
You should clean your Philips Sonicare toothbrush
regularly to remove toothpaste and other residue.
Failure to clean your Philips Sonicare toothbrush may
result in an unhygienic product and damage to it may
occur.
Warning: Do not clean product or accessories
with sharp objects or in dishwasher, microwave,
with chemicals or in boiling hot water
Remove the brush head and rinse the metal shaft
1
area with warm water. Make sure you remove any
residual toothpaste.
Caution: Do not push on the rubber seal on the metal
shaft with sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp
cloth.
Note: Do not tap the handle on the sink to remove
excess water.