Effect - Pioneer DDJ-T1 Operating Instructions Manual

3 HEADPHONES VOL control
Adjusts the audio level output from the [PHONES] terminal.
4 GAIN control
Adjusts the sound level input to the various decks.
5 EQ (HI, MID, LOW) controls
These adjust the sound quality input to the various decks.
These adjust the [HI] (high range), [MID] (medium range) and [LOW]
(low range), respectively.
6 Effect assign buttons
Press the [1] or [2] button to assign TRAKTOR effect unit [FX 1] or
[FX 2] to the deck.
7 CUE button
The sound of decks for which the headphones [CUE] button is
pressed can be monitored over headphones.
When multiple headphones [CUE] buttons are pressed, the sound of
the decks for which the buttons are pressed is mixed and output from
the headphones.
8 SYNC button
The track on the deck for which the [SYNC] button is pressed is
synchronized to the [BPM] and [Beat Grid] of the deck for which the
[MASTER] button is pressed or of the master clock.

4 Effect

1
ADVANCED
CHAINED
FX1
FUNCTION
IN
IN ADJUST OUT ADJUST
AUTO LOOP
! The [Advanced] mode cannot be selected with TRAKTOR Pioneer DDJ-T1 EDITION.
! The effect panel can be switched to the [Advanced] mode when you upgrade to TRAKTOR PRO or TRAKTOR SCRATCH PRO.
1 ADVANCED/ CHAINED selector button
! [Chained] mode: Up to 3 effects can be selected on the effect
panels and operated simultaneously.
! [Advanced] mode: The parameters of the one selected effect
can be adjusted in detail.
2 Effect button
This button is exclusively for use in the [Advanced] mode.
3 DRY/WET control
Changes the balance between the effect sound and original sound.
4 SELECT/BACK button
The effect type switches each time the button is pressed.
With TRAKTOR Pioneer DDJ-T1 EDITION, the 6 types of effects below
can be used.
[no Effect] [Delay] [Reverb]
— When the [SELECT/BACK] button is pressed while pressing the
[SHIFT] button, the direction in which the effect types switch is
reversed.
2 3 4 5
OFF ON
DRY/ WET SELECT/ BACK 1 2
1
2
MIN MAX MIN MAX MIN MAX
3
NEEDLE SEARCH
OUT
MODE SIZE
MOVE
ACTIVE
HOT CUE DELETE 1
5
[Flanger] [Beatmasher2] [Gater]
9 MASTER button
Sets the tempo of the deck for which the [MASTER] button is pressed
as the master for synchronizing with the beat sync function.
a Channel fader
Adjusts the sound level output from the various decks.
b CH FADER START switch
Switches the [CH FADER START] function on/ off.
When the [CH FADER START] switch is set to [ON], the fader start
and back cue functions can be used according to the movement of
the channel faders.
! Fader start: When the channel fader is moved from the front-
most position towards the back while pausing at the cue point,
playback starts immediately.
! Back cue: When the channel fader is returned from the back to
the front-most position, playback returns to the set cue point,
cues there, and the pause mode is set immediately.
c Crossfader
Switches the sound of the decks assigned to the left and right sides
of the crossfader for output.
The deck assignment can be changed with the [Deck Assign Button]
at the sides of the TRAKTOR crossfader.
Do not pull on the channel fader and crossfader knobs with excessive
force. The knobs are not designed to be removed. Pulling the knobs
strongly may result in damaging the unit.
3
LOAD
A C
3
GAIN
C
MIN MAX
DECK
MIN MAX
HI
LOW HI
MIN MAX
MID
FILTER
EQ EQ
MIN MAX
BWD FWD
LOW
2 3 4
6 7 8
MIN MAX
KEY TEMPO
LOCK RANGE 1 2
FX
— When in the [Advanced] mode, the effect type is switched by
pressing the [1] button for [SELECT/BACK].
5 Effect control
! Effect control dials
The linked functions differ depending on the TRAKTOR effect
panel's mode.
— [Chained] mode: Adjusts the balance between the effect
sound of the each effects and the original sound.
— [Advanced] mode: Adjusts the various parameters of the
selected effect.
! Effect control buttons
The linked functions differ depending on the TRAKTOR effect
panel's mode.
— [Chained] mode: Switches the various effects on/ off.
— [Advanced] mode: When the effect control [1] button is
pressed, all the effect setting values return to the default
setting values.
When effect control buttons [2] and [3] are pressed, the
various parameters switch between on and off. The types of
parameters differ according to the effect.
4 5
TREE FAVORITES
LOAD LOAD LOAD
A B D
REC
PUSH
GAIN GAIN GAIN
BROWSE VIEW
MAIN
MIN MAX MIN MAX MIN
HI HI HI
VOL
MIN MAX
MIN MAX MIN MAX MIN
MID MID MID
HEADPHONES
EQ
MIX
MIN MAX MIN MAX MIN
LOW LOW LOW
CUE MASTER
VOL
MIN MAX MIN MAX MIN
1 2 1 2 1
FX FX FX
MIN MAX
MAX
MAX
EQ
MAX
MAX
2
19
En