Philips GoGear Digital Audio Player User Manual page 43

Device Restore / Repair
Your device is controlled by an internal program called firmware. In case the firmware
files is corrupted, you may need to repair the device.
TIP
Please insert a new battery before device restore/repair. This will ensure steady power
supply for completing the whole process.
1 Connect your device to your computer. Launch Device Manager from Start
Philips Device Manager.
WARNING !
All content and music will be erased!
Please back up all your files before device restore/repair.
2 In the main window, click Restore/ Repair. On screen indication:
Select Philips/Philips SD Card. Press OK to confirm your selection. You will be prompted to
disconnect your device from your computer as soon as Device Manager finishes interacting
with your device.
3 Please safely remove your device by clicking
4 Once the USB cable is disconnected, firmware restore will start automatically. The process
is complete when the device restarts and display the power up splash screen.
from your task tray.
Program
18